The article directly below on the subject of Furnace Service is exceedingly informative. Try it and make your own conclusions.

Check our our Video

HOW TO LOCATE YOUR FURNACE

Air circulation in your home

If you have central heating, the furnace (also known as an air handler) in your home will heat your air in the winter while the blower motor circulates the air throughout your home. The AC evaporator coils for your air handler remove heat and humidity in summer. After your furnace heats or cools your air, it is then supplied to the duct system and the air begins flowing through your registers.

How many air systems run in your home?

Your thermostat is what sets the temperature in your home for your comfort. The number of thermostat(s) determine how many systems work to regulate your indoor air for heating and cooling.

Improve IAQ with Duct cleaning

Air duct cleaning can help reduce allergies from dust and other pollutants. Pollen, dust, and mold spores can get trapped in your duct work, which means that it's being continuously circulated throughout the air you breathe at home.

According to the U.S. Department of Energy (DOE), 25 to 40 percent of the energy used for heating or cooling a home is wasted. Contaminants in the heating and cooling system cause it to work harder and shorten the life of your system. Although filters are used, the heating and cooling system still gets dirty through normal use.

The National Air Duct Cleaners Association (NADCA) recommends air duct cleaning for improvement of Indoor Air Quality (IAQ). A certified duct cleaning will include cleaning of the furnace, the main trunk line [for air circulation] and all vents (including supplies and returns) each cleaned out individually.

Where is a furnace/air-handler typically located in a home?

Typically your furnace is centrally located in the home. It is usually located in an area such as a utility closet (by a cold air return), garage, attic, basement, or crawlspace; in the case of a heat-pump (a dual-system) it will be located outside of the home. When your system is run with a heat pump, it is likely a typical duct cleaning will include cleaning of evaporator coils with full system cleanings. Your furnace is usually located by other mechanical equipment such as the hot water heater, a [permanently installed] central vacuum cleaner, or a water softener, if this equipment is installed in your home.

AC Repair Service https://www.advantaclean.com/blog/2014/november/how-to-locate-your-furnace/

Heating Repair And Seasonal Maintenance Tips

There are many ways to maintain your furnace system. Chances are good the system shall be running all day long during the cold months. In fact, it is probably on more than it needs to be because it is unable to maintain an operable climate. There there are various areas in the heating section to take a look at when trouble shooting for efficiency.

Change The Air Filter

This part is what gets brought up probably the most in talks about furnace maintenance, but is usually overlooked. When there is a blockage, you either run the chance of not disbursing heat appropriately or possibly starting a fire.When the filter becomes dirty air will not flow through either which means the unit must work harder and will also mean a risk of fire. If the system is not circulating heat effectively, it is working overtime. You want to obviously remove any likelihood of fire. In each case it is not good for reassurance or your finances.

Look At The Blower

Check your blower blades and clean them. A dirty fan will work harder to blow air around and of course use more energy to maintain the thermostat level you set it at. This means the system is over taxed and costing extra money to run.

Fire Damper Function

Be sure to check your fire damper for correct operation. This will make sure that the fir risk is minimal and that the system will work more efficiently.

Look For Holes In The Flex Duct

It is feasible that your ducts became damaged throughout the years for a variety of reasons. If a duct has collapsed or become stopped up, the system will believe that the right temperature has been reached, which will not be true. When this happens the furnace works harder to do its job but is going to be incapable to attain the right tempurature.

Make Sure The Insulation Is Secure

It is easy to miss the insulation, but is probably the most common reason behind a system out of order. Be sure to check the insulation and confirm it has never become loose and caused gaps between the ductwork and of course the outside. If this happens, your system will not reach optimal temperatures and will work too much to try and accommodate.

Ductwork Needs To Be Connected

Make be certain the ductwork is hooked up in all places to all sections. These detachments may cause space in the air movement and cause a loss of heated air in your house, since it will be escaping through the gaps.

Check For Leaks In The Return Air Inlets And The Zone Dampers

Ensure that return air intakes are free of the dust and dirt so air can easily flow. Check your dampers verifying they are in the right place. Sometimes a damper can get moved in error like when you need to squeeze by it, or create space for storage. Check to notice that the dampers are in the right position too.

If that is a little too much to handle alone, we propose you hire a local plumbing contractor licensed for furnace and heating repair. There will be a number of heating companies around you who can care for all of this quite skillfully. For the best results you could arrange annual up-keep for furnace and the heating people will call yearly to take care of it.

Hopefully you liked our post on Home Heating Furnace. Thanks so much for finding the time to browse our piece. Sharing is good. You just don't know, you may very well be doing someone a favor. We take joy in your readership.